产品分类
产品详情您的位置:首页 > 供应产品 > 微型压式测力传感器 > 微型压式传感器LFC-22
 ![]()  | 
						
							
  | 
					
	
 
	
 
	
	
	
产品特点及用途:
	
	
	
主要应用于:热压机械压力检测、压装机械压力检测、汽车、摩托车、自行车装配过盈力的检测等测力场所
	
 
Force measurement,such as compression measurement for switches,hot-pressing machine,pile press machine,and interference force detection inassemble of automobiles,motorcycles,bikes,electrical, etc.
	
	
产品量程及尺寸图纸:
	
 
	
	
	
产品主要的技术参数:
	
| 
				 量程 Capacity  | 
			
				 0~10,20,30,50kg  | 
			
				 材质 Material  | 
			
				 不锈钢 Stainless Steel  | 
		
| 
				 输出灵敏度 Rated Output  | 
			
				 1.5±10%mV/V  | 
			
				 输出电阻 Output Impedance  | 
			
				 700Ω  | 
		
| 
				 零点输出 Zero Balance  | 
			
				 ±2% F.S.  | 
			
				 绝缘电阻 Insulation  | 
			
				 ≥5000MΩ/100VDC  | 
		
| 
				 非线性 Non-linearity  | 
			
				 0.1%F.S.  | 
			
				 使用电压 Recommended Excitation  | 
			
				 2.5-10V  | 
		
| 
				 滞后 Hysteresis  | 
			
				 0.1%F.S.  | 
			
				 最大使用电压 Maximum Excitation  | 
			
				 15V  | 
		
| 
				 重复性 Repeatability  | 
			
				 0.1%F.S.  | 
			
				 温度补偿范围 Compensated Temp Range  | 
			
				 -10~60℃  | 
		
| 
				 蠕变 (30分钟)Creep (30min)  | 
			
				 0.1% F.S.  | 
			
				 工作温度 范围 Operating Temp Range  | 
			
				 -20~80℃  | 
		
| 
				 温度灵敏度漂移Temp Effect on Output  | 
			
				 0.05%F.S./10℃  | 
			
				 安全超载 Safe Load Limit  | 
			
				 120%  | 
		
| 
				 零点温度漂移 Temp Effect on Zero  | 
			
				 0.05%F.S./10℃  | 
			
				 极限超载 Ultimate Load Limit  | 
			
				 150%  | 
		
| 
				 输入电阻 Input Impedance  | 
			
				 750±15Ω  | 
			
				 电缆线尺寸 Cable Size  | 
			
				 φ3x3m  | 
		
| 
				 
					TEDS  可选  | 
			
				 | 
		||
	
	
	
	其他信息:
 
	
 
如您有其他的需要,如量程、尺寸、安装位置、内置变送器等其他要求,请于我们联系,我们可为您量身定做。
也欢迎您来我司莅临指导。
	
	

上一条:单点式传感器LFP-10
下一条:柱式传感器LF-611
- 动态力测量传感器的选用2020-03-07
 - 三维力传感器工作原理介绍2019-08-07
 - 【精选】拉力传感器应用原理_微型力传感器的选型2019-04-19
 - 【传感器小科普】压力/液压传感器知识普及2019-03-13
 






